Solenoid Model D30-ML
Part Number 53803-88
Electrical Specifications
| Voltage | 24 VDC |
| Coil Resistance | 27.43 |
| Power | 21 Watts |
| Duty Cycle | Intermittent |
| On Time | 250 ms |
| Duty Cycle/Power Note | Approximately 36 sq. in. Heat Sink Required |
| Dielectric Strength | 500 VRMS for 1 minute |
| Insulation Class | Class F (155º C) |
| Standard Coil Treatment | Encapsulated |
| Optional Coil Treatment | Tape Wrapped |
| Termination | Wire leads 18 AWG (standard) |
Mechanical Specifications
| Length | 2.011 |
| Width (Diameter) | 1.000 |
| Height | 1.218 |
| Plunger Diameter | 0.4375 |
| Plunger Guide Material | Plastic |
| Life Expectancy | 10^6 Under Optimal Load Conditions |
| Operation | Pull |
| Weight | Plunger - 1.2 oz. Total - 6.3 oz. |
Performance Specifications
| Maximum Stroke | 1.000 |
| Stroke (in) | Force (oz) |
| 0.000" | 96 |
| 0.125" | 65 |
| 0.250" | 46 |
| 0.375" | 31 |
| 0.500" | 19.7 |
| 0.625" | 13 |
| 0.750" | 7.7 |
| 0.875" | 3 |
| 1.000" | 1.3 |
Agency Approvals
| UL | UL File No. E74443 For Insulation Systems S105, S130, S130D, S130D1, S155D |
