Model D-90
Part Number 53656-81
Electrical Specifications
| Voltage | 12 VDC |
| Coil Resistance | 0.6 |
| Power | 230 Watts |
| Duty Cycle | Pulse |
| On Time | 10% - 100 ms on max. |
| Duty Cycle/Power Note | Approximately 100 sq. in. heat sink required |
| Dielectric Strength | 500 VRMS for 1 minute |
| Insulation Class | Class A Rating - 105?C (221?F) standard Class B Rating - 130?C (266?F) optional |
| Standard Coil Treatment | Tape Wrapped |
| Optional Coil Treatment | |
| Termination | Wire leads (standard) |
Mechanical Specifications
| Length | 3.540 |
| Width (Diameter) | 1.750 |
| Height | 1.940 |
| Plunger Diameter | 0.625 |
| Plunger Guide Material | Plastic |
| Life Expectancy | 10^7 Cycles Under Optimum Load Conditions |
| Operation | Pull |
| Weight | Plunger - 4.3 oz. Total - 34 oz. |
Performance Specifications
| Maximum Stroke | 1.500 |
| Stroke (in) | Force (oz) |
| 0.000" | 303 |
| 0.125" | 280 |
| 0.250" | 275 |
| 0.375" | 258 |
| 0.500" | 235 |
| 0.625" | 225 |
| 0.750" | 205 |
| 0.875" | 183 |
| 1.000" | 175 |
Agency Approvals
| UL | UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105, S130 |
