Solenoid Model D-22
Part Number 53723-82
Electrical Specifications
| Voltage | 24 VDC |
| Coil Resistance | 141 |
| Power | 4.2 Watts |
| Duty Cycle | Continuous |
| On Time | 100% on time |
| Duty Cycle/Power Note | Approximately 36 sq. in. Heat Sink Required |
| Dielectric Strength | 500 VRMS for 1 minute |
| Insulation Class | Class A Rating - 105ºC (221ºF) standard |
| Standard Coil Treatment | Encapsulated |
| Optional Coil Treatment | Tape Wrapped |
| Termination | .110" quick connect terminals (standard) Wire leads optional with tape wrapped coil |
Mechanical Specifications
| Length | 1.130 |
| Width (Diameter) | 0.750 |
| Height | 0.750 |
| Plunger Diameter | 0.250 |
| Plunger Guide Material | Plastic |
| Life Expectancy | 10^7 Cycles Under Optimum Load Conditions |
| Operation | Pull |
| Weight | Plunger - 0.25 oz. Total - 1.5 oz. |
Performance Specifications
| Maximum Stroke | 0.400 |
| Stroke (in) | Force (oz) |
| 0.000" | 30 |
| 0.125" | 4 |
| 0.250" | 1.8 |
| 0.375" | 1.1 |
| 0.500" | 0 |
| 0.625" | 0 |
| 0.750" | 0 |
| 0.875" | 0 |
| 1.000" | 0 |
Agency Approvals
| UL | UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105 |
