Solenoid Model D26-ML
Electrical Specifications for Solenoid Model D26-ML
| Insulation Class | Class B (130º C) |
| Standard Coil Treatment | Tape Wrapped |
| Optional Coil Treatment | |
| Termination | 22 AWG Lead Wires with Optional Molex Connector |
| Dielectric Strength | 30 Volts and Under: 500 VRMS Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute |
Solenoid Model D26-ML Mechanical Specs
| Length | 1.420 |
| Width (Diameter) | 0.790 |
| Height | 1.020 |
| Plunger Diameter | .394 |
| Plunger Guide Material | Brass |
| Life Expectancy | 10^6 Under Optimal Load Conditions |
| Weight | Plunger - 0.9 oz. Total - 3.9 oz. |
Agency Approvals
| UL | UL File No. E74443 For Insulation Systems S105, S130, S130D, S130D1, S155D |
| Part No. | Voltage | Duty Cycle | Power | Resistance (ohms) | Operation | Normally Stocked | Typical Force (oz), 100% Voltage, 77° F, @ |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.000" | 0.125" | 0.250" | 0.500" | 0.750" | |||||||
| 53800-86 | 6 VDC | Intermittent | 12 Watts | 3 | Pull | Yes | 109 | 47.1 | 31 | 14.3 | 0 |
| 53800-87 | 12 VDC | 12 | Pull | Yes | |||||||
| 53800-88 | 24 VDC | 48 | Pull | Yes | |||||||
| 53800-92 | 6 VDC | Pulse | 50 Watts | 0.72 | Pull | No | 109 | 71.2 | 46.8 | 19.4 | 0 |
| 53800-93 | 12 VDC | 2.88 | Pull | No | |||||||
| 53800-94 | 24 VDC | 11.52 | Pull | No | |||||||