Deltrol Controls
 
414.671.6800
HomeAbout UsSales RepsDistributor LocatorCareersLatest NewsContact UsSitemap
A Leader in the Design & Manufacture of Electro-Mechanical Products

Solenoid Model MED 24x1.700

Electrical Specifications for Solenoid Model MED 24x1.700

Insulation Class Class B Rating - 130ºC (265ºF)
Standard Coil Treatment Tape Wrapped
Optional Coil Treatment
Termination Wire leads 20 AWG (standard)
Dielectric Strength 30 Volts and Under: 500 VRMS
Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute

Solenoid Model MED 24x1.700 Mechanical Specs

Length 1.700
Width (Diameter) 1.500
Height 0.000
Plunger Diameter 0.625
Plunger Guide Material Brass
Life Expectancy 10^7 Cycles Under Optimum Load Conditions
Weight Plunger - 2.6 oz.
Total - 11.1 oz.

Agency Approvals

UL UL File No. E57982 For Continuous Duty
UL File No. E74443 For Insulation Systems
S130
Part No. Voltage Duty Cycle Power Resistance (ohms) Operation Normally Stocked Typical Force (oz), 100% Voltage,
77° F, @
0.000" 0.125" 0.250" 0.500" 0.750"
53797-80 6 VDC Continuous 12 Watts 3 Pull No 173 56 26 8 2
53798-80 6 VDC 3 Push No
53797-81 12 VDC 12 Pull Yes
53798-81 12 VDC 12 Push No
53797-82 24 VDC 48 Pull Yes
53798-82 24 VDC 48 Push No
53797-83 110 VDC 1008 Pull No
53798-83 110 VDC 1008 Push No
53797-84 6 VDC Intermittent 33 Watts 1.09 Pull No 251 130 60 20 7
53798-84 6 VDC 1.09 Push No
53797-85 12 VDC 4.36 Pull Yes
53798-85 12 VDC 4.36 Push No
53797-86 24 VDC 17.5 Pull Yes
53798-86 24 VDC 17.5 Push No
53797-87 110 VDC 366.7 Pull No
53798-87 110 VDC 366.7 Push No
53797-88 12 VDC Pulse 120 Watts 1.2 Pull No 358 275 185 75 22
53798-88 12 VDC 1.2 Push No
53797-89 24 VDC 4.8 Pull No
53798-89 24 VDC 4.8 Push No
53797-90 110 VDC 100.8 Pull No
53798-90 110 VDC 100.8 Push No