Deltrol Controls
 
414.671.6800
HomeAbout UsSales RepsDistributor LocatorCareersLatest NewsContact UsSitemap
A Leader in the Design & Manufacture of Electro-Mechanical Products

Solenoid Model MED 16x2.000

Electrical Specifications

Insulation Class Class A Rating - 105?C (221?F)
Standard Coil Treatment Tape Wrapped
Optional Coil Treatment
Termination Wire leads 24 AWG (standard)
Dielectric Strength 30 Volts and Under: 500 VRMS
Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute

Mechanical Specifications

Length 2.000
Width (Diameter) 1.000
Height 0.000
Plunger Diameter 0.4375
Plunger Guide Material Plastic
Life Expectancy 10^7 Cycles Under Optimum Load Conditions
Weight Plunger - 1.53 oz.
Total - 6.5 oz.

Agency Approvals

UL UL File No. E57982 For Continuous Duty
UL File No. E74443 For Insulation Systems
S105
Part No. Voltage Duty Cycle Power Resistance (ohms) Operation Normally Stocked Typical Force (oz), 100% Voltage,
77° F, @
0.000" 0.125" 0.250" 0.500" 0.750"
53753-80 6 VDC Continuous 10 Watts 3.8 Pull No 129 42 18 8 5
53757-80 6 VDC 3.8 Push No
53753-81 12 VDC 15 Pull Yes
53757-81 12 VDC 15 Push Yes
53753-82 24 VDC 60 Pull Yes
53757-82 24 VDC 60 Push Yes
53753-84 115 VDC 1500 Pull No
53757-84 115 VDC 1500 Push No
53753-86 6 VDC Intermittent 24 Watts 1.5 Pull No 149 72 36 15 8
53757-86 6 VDC 1.5 Push No
53753-87 12 VDC 6 Pull Yes
53757-87 12 VDC 6 Push Yes
53753-88 24 VDC 24 Pull Yes
53757-88 24 VDC 24 Push Yes
53753-90 115 VDC 600 Pull No
53757-90 115 VDC 600 Push No
53753-92 6 VDC Pulse 96 Watts 0.37 Pull No 201 150 115 77 60
53757-92 6 VDC 0.37 Push No
53753-93 12 VDC 1.5 Pull No
53757-93 12 VDC 1.5 Push No
53753-94 24 VDC 6 Pull No
53757-94 24 VDC 6 Push No
53753-96 115 VDC 150 Pull No
53757-96 115 VDC 150 Push No