Deltrol Controls
 
414.671.6800
HomeAbout UsSales RepsDistributor LocatorCareersLatest NewsContact UsSitemap
A Leader in the Design & Manufacture of Electro-Mechanical Products

Solenoid Model MED 16x1.125

Electrical Specifications

Insulation Class Class A Rating - 105?C (221?F) standard
Standard Coil Treatment Tape Wrapped
Optional Coil Treatment
Termination Wire leads 24 AWG (standard)
Dielectric Strength 30 Volts and Under: 500 VRMS
Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute

Mechanical Specifications

Length 1.125
Width (Diameter) 1.000
Height 0.000
Plunger Diameter 0.4375
Plunger Guide Material Plastic
Life Expectancy 10^7 Cycles Under Optimum Load Conditions
Weight Plunger - 1.05 oz.
Total - 4.375 oz.

Agency Approvals

UL UL File No. E57982 For Continuous Duty
UL File No. E74443 For Insulation Systems
S105
Part No. Voltage Duty Cycle Power Resistance (ohms) Operation Normally Stocked Typical Force (oz), 100% Voltage,
77° F, @
0.000" 0.125" 0.250" 0.500" 0.750"
53754-80 6 VDC Continuous 8 Watts 4.7 Pull No 94 13 4 0 0
53759-80 6 VDC 4.7 Push No
53754-81 12 VDC 19 Pull Yes
53759-81 12 VDC 19 Push No
53754-82 24 VDC 75 Pull Yes
53759-82 24 VDC 75 Push No
53754-84 115 VDC 1900 Pull No
53759-84 115 VDC 1900 Push No
53754-86 6 VDC Intermittent 19 Watts 1.9 Pull No 126 30 10 0 0
53759-86 6 VDC 1.9 Push No
53754-87 12 VDC 7.5 Pull Yes
53759-87 12 VDC 7.5 Push No
53754-88 24 VDC 30 Pull Yes
53759-88 24 VDC 30 Push No
53754-90 115 VDC 750 Pull No
53759-90 115 VDC 750 Push No
53754-92 6 VDC Pulse 77 Watts 0.47 Pull No 180 93 50 0 0
53759-92 6 VDC 0.47 Push No
53754-93 12 VDC 1.9 Pull No
53759-93 12 VDC 1.9 Push No
53754-94 24 VDC 7.5 Pull No
53759-94 24 VDC 24 VDC Push No
53754-96 115 VDC 190 Pull No
53759-96 115 VDC 190 Push No