Deltrol Controls
 
414.671.6800
HomeAbout UsSales RepsDistributor LocatorCareersLatest NewsContact UsSitemap
A Leader in the Design & Manufacture of Electro-Mechanical Products

Solenoid Model MED 12x1.500

Electrical Specifications

Insulation Class Class A Rating - 105?C (221?F) standard
Standard Coil Treatment Tape Wrapped
Optional Coil Treatment
Termination Wire leads 24 AWG (standard)
Dielectric Strength 30 Volts and Under: 500 VRMS
Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute

Mechanical Specifications

Length 1.500
Width (Diameter) 0.750
Height 0.000
Plunger Diameter 0.3125
Plunger Guide Material Plastic
Life Expectancy 10^7 Cycles Under Optimum Load Conditions
Weight Plunger - 0.74 oz.
Total - 2.56 oz.

Agency Approvals

UL UL File No. E57982 For Continuous Duty
UL File No. E74443 For Insulation Systems
S105
Part No. Voltage Duty Cycle Power Resistance (ohms) Operation Normally Stocked Typical Force (oz), 100% Voltage,
77° F, @
0.000" 0.125" 0.250" 0.500" 0.750"
53751-80 6 VDC Continuous 6 Watts 6.2 Pull No 38 7.5 3 1.5 0
53761-80 6 VDC 6.2 Push No
53751-81 12 VDC 25 Pull Yes
53761-81 12 VDC 25 Push Yes
53751-82 24 VDC 100 Pull Yes
53761-82 24 VDC 100 Push Yes
53751-84 115 VDC 2500 Pull No
53761-84 115 VDC 2500 Push No
53751-86 6 VDC Intermittent 15 Watts 2.5 Pull No 50 20 10 4 0
53761-86 6 VDC 2.5 Push No
53751-87 12 VDC 10 Pull Yes
53761-87 12 VDC 10 Push Yes
53751-88 24 VDC 40 Pull Yes
53761-88 24 VDC 40 Push Yes
53751-90 115 VDC 1000 Pull No
53761-90 115 VDC 1000 Push No
53751-92 6 VDC Pulse 58 Watts 0.62 Pull No 64 40 26 16 0
53761-92 6 VDC 0.62 Push No
53751-93 12 VDC 2.5 Pull No
53761-93 12 VDC 2.5 Push No
53751-94 24 VDC 10 Pull No
53761-94 24 VDC 10 Push No
53751-96 115 VDC 250 Pull No
53761-96 115 VDC 250 Push No