Solenoid Model D-90
Electrical Specifications for Solenoid Model D-90
| Insulation Class | Class A Rating - 105ºC (221ºF) standard Class B Rating - 130ºC (266ºF) optional |
| Standard Coil Treatment | Tape Wrapped |
| Optional Coil Treatment | |
| Termination | Wire leads (standard) |
| Dielectric Strength | 30 Volts and Under: 500 VRMS Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute |
Solenoid Model D-90 Mechanical Specs
| Length | 3.540 |
| Width (Diameter) | 1.750 |
| Height | 1.940 |
| Plunger Diameter | 0.625 |
| Plunger Guide Material | Plastic |
| Life Expectancy | 10^7 Cycles Under Optimum Load Conditions |
| Weight | Plunger - 4.3 oz. Total - 34 oz. |
Agency Approvals
| UL | UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105, S130 |
| Part No. | Voltage | Duty Cycle | Power | Resistance (ohms) | Operation | Normally Stocked | Typical Force (oz), 100% Voltage, 77° F, @ |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.000" | 0.125" | 0.250" | 0.500" | 0.750" | |||||||
| 53654-80 | 6 VDC | Continuous | 23 Watts | 1.58 | Pull | No | 150 | 115 | 108 | 80 | 50 |
| 53654-81 | 12 VDC | 6.3 | Pull | No | |||||||
| 53654-83 | 24 VDC | 25 | Pull | No | |||||||
| 53654-93 | 110 VDC | 506 | Pull | No | |||||||
| 53655-81 | 12 VDC | Intermittent | 58 Watts | 2.2 | Pull | No | 202 | 162 | 158 | 133 | 100 |
| 53655-83 | 24 VDC | 10.2 | Pull | No | |||||||
| 53655-93 | 110 VDC | 204 | Pull | No | |||||||
| 53656-81 | 12 VDC | Pulse | 230 Watts | 0.6 | Pull | No | 303 | 280 | 275 | 235 | 205 |
| 53656-83 | 24 VDC | 2.2 | Pull | No | |||||||
| 53656-93 | 110 VDC | 51 | Pull | No | |||||||