Deltrol Controls
 
414.671.6800
HomeAbout UsSales RepsDistributor LocatorCareersLatest NewsContact UsSitemap
A Leader in the Design & Manufacture of Electro-Mechanical Products

Solenoid Model D-50

Electrical Specifications for Solenoid Model D-50

Insulation Class Class A Rating - 105ºC (221ºF) standard
Class B Rating - 130ºC (266ºF) optional
Standard Coil Treatment Tape Wrapped
Optional Coil Treatment
Termination Wire leads (standard)
Dielectric Strength 30 Volts and Under: 500 VRMS
Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute

Solenoid Model D-50 Mechanical Specs

Length 1.625
Width (Diameter) 1.562
Height 1.828
Plunger Diameter 0.500
Plunger Guide Material Plastic
Life Expectancy 10^7 Cycles Under Optimum Load Conditions
Weight Plunger - 1.27 oz.
Total - 12 oz.

Agency Approvals

UL UL File No. E57982 For Continuous Duty
UL File No. E74443 For Insulation Systems
S105, S130
Part No. Voltage Duty Cycle Power Resistance (ohms) Operation Normally Stocked Typical Force (oz), 100% Voltage,
77° F, @
0.000" 0.125" 0.250" 0.500" 0.750"
51053-81 12 VAC Continuous 14 VA 0.95 Pull No 84 24 21 19 10
51053-83 24 VAC 3.8 Pull No
51053-94 120 VAC 97.4 Pull No
51053-97 240 VAC 392 Pull No
50014-83 24 VAC Intermittent 53 VA 1.55 Pull No 151 52 46 40 24
50014-94 120 VAC 40.7 Pull No
50014-97 240 VAC 162 Pull No
53699-83 24 VAC Pulse 140 VA 0.70 Pull No 227 109 94 90 54
53699-94 120 VAC 18.1 Pull No
53699-97 240 VAC 72.7 Pull No
51051-80 6 VDC Continuous 10 Watts 3.77 Pull No 158 60 25 8 4
51051-81 12 VDC 14.5 Pull No
51051-83 24 VDC 58.2 Pull No
51051-93 110 VDC 1210 Pull No
50029-80 6 VDC Intermittent 25 Watts 1.42 Pull No 183 128 65 21 9
50029-81 12 VDC 5.7 Pull No
50029-83 24 VDC 23.0 Pull No
50029-93 110 VDC 486 Pull No
53744-80 6 VDC Pulse 100 Watts 0.35 Pull No 226 225 180 82 35
53744-81 12 VDC 1.42 Pull No
53744-82 24 VDC 5.7 Pull No
53744-84 110 VDC 121 Pull No