Deltrol Controls
 
414.671.6800
HomeAbout UsSales RepsDistributor LocatorCareersLatest NewsContact UsSitemap
A Leader in the Design & Manufacture of Electro-Mechanical Products

Solenoid Model C-5

Electrical Specifications

Insulation Class Class A Rating - 105?C (221?F)
Standard Coil Treatment Tape Wrapped
Optional Coil Treatment
Termination Wire leads 22 AWG (standard)
Dielectric Strength 30 Volts and Under: 500 VRMS
Over 30 Volts: 100 VRMS plus 2X rated voltage for 1 minute

Mechanical Specifications

Length 0.969
Width (Diameter) 0.734
Height 0.812
Plunger Diameter 0.3125
Plunger Guide Material Plastic
Life Expectancy 10^7 Cycles Under Optimum Load Conditions
Weight "Plunger - 0.317 oz.
Total - 1.5 oz."

Agency Approvals

UL UL File No. E57982 For Continuous Duty
UL File No. E74443 For Insulation Systems
S105
Part No. Voltage Duty Cycle Power Resistance (ohms) Operation Normally Stocked Typical Force (oz), 100% Voltage,
77° F, @
0.000" 0.125" 0.250" 0.500" 0.750"
53747-80 6 VAC Continuous 4.7 VA 3.23 Pull No 24 3.5 2 0 0
53747-81 12 VAC 13.1 Pull No
53747-82 24 VAC 52.1 Pull No
53747-84 120 VAC 1273 Pull No
53747-85 240 VAC 5100 Pull No
53747-86 6 VAC Intermittent 14 VA 1.15 Pull No 50 9.5 5.5 0 0
53747-87 12 VAC 4.76 Pull No
53747-88 24 VAC 19.1 Pull No
53747-90 120 VAC 480 Pull No
53747-91 240 VAC 1940 Pull No
53747-92 6 VAC Pulse 47 VA 0.445 Pull No 86 25 15 0 0
53747-83 12 VAC 1.77 Pull No
53747-94 24 VAC 7 Pull No
53747-96 120 VAC 183 Pull No
53747-97 240 VAC 738 Pull No
53746-80 6 VDC Continuous 3.7 Watts 10.4 Pull No 25 3 1.5 0 0
53746-81 12 VDC 41.6 Pull No
53746-82 24 VDC 168 Pull No
53746-84 110 VDC 3265 Pull No
53746-86 6 VDC Intermittent 11 Watts 3.23 Pull No 38 12 5 0 0
53746-87 12 VDC 13.1 Pull No
53746-88 24 VDC 52.1 Pull No
53746-90 110 VDC 1125 Pull No
53746-92 6 VDC Pulse 42 Watts 0.8 Pull No 62 34 19 0 0
53746-93 12 VDC 3.23 Pull No
53746-94 24 VDC 13.1 Pull No
53746-96 110 VDC 282 Pull No