Home › Products › Solenoids › D-Frames › D-90

53655-81

request a quote

Agency Approvals

  • UL File No. E57982 For Continuous Duty
  • UL File No. E74443 For Insulation Systems
  • S105, S130
Electrical Specifications
Voltage:
12 VDC
Coil Resistance:
2.2
Power:
58 Watts
Duty Cycle:
Intermittent
On Time:
25% - 3 minutes on max.
Duty Cycle Power Note:
Approximately 100 sq. in. heat sink required
Dielectric Strength:
30 Volts and Under: 500 VRMSOver 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute
Insulation Class:
Class A Rating - 105ºC (221ºF) standard Class B Rating - 130ºC (266ºF) optional
Coil Treatment:
Tape Wrapped
Optional Coil Treatment:
 
Termination:
Wire leads (standard)
Mechanical Specifications
Length:
3.54 inches
Solenoid Width:
1.75 inches
Solenoid Height:
1.940 inches
Plunger Diameter:
0.63 inches
Plunger Guide Material:
Plastic
Life Expectancy:
250,000 Cycles (Dependent on load conditions)
Operation:
Pull
Solenoid Weight:
Plunger - 4.3 oz. Total - 34 oz.
Performance Specifications
Maximum Stroke:
1.500
Force 0.000":
202.00 oz
Force 0.125":
162.00 oz
Force 0.250":
158 oz
Force 0.375":
147
Force 0.500":
133 oz
Force 0.625":
112 oz
Force 0.750":
100 oz
Force 0.875":
82 oz
Force 1.000":
70 oz

Solenoid Search

Click a term to initiate a search.

Solenoid Type

Minimum Stroke

Voltage

Duty Cycle

Coil Treatment