2-way, direct acting solenoid valve used to dispense low pressure water (up to 18" w.c.)

Features

  • Up to 3.6 fl oz/sec at 4" w.c.
  • High flow capacity
  • Viton seal option for corrosive media
  • UR & cUR certified
  • Not for potable water applications

Contact the factory for configuration options other than what is shown below. Minimum quantities will apply.

Part numbersort icon Model Coil Voltage Diaphragm Material Flow Adjuster
70051-80 DSVP10 12 VDC VITON No
70052-81 DSVP10 110/120 VAC 50/60 HZ VITON No
70052-82 DSVP10 220/240 VAC 50/60 HZ VITON No
Electrical Specifications
Coil Voltages:
24, 120, 240 VAC, 50, 60 Hz
Coil Voltages:
12, 24, 36 VDC
Internally Rectified Coils:
No
Coil Power:
30 W (std)
Coil Terminals:

0.25" x 0.03"
spade terminals

Duty Cycle:
Intermittent (std)
Ambient Temperature:

95° F (35° C)

Coil Treatment:
Polyester encapsulated
Insulation Class:

Class F
311° F (155° C)

Ground Lug Option:
No
Mechanical Specifications
Inlet Outlet Connection Options:

Ø0.77 barb / Ø0.77 barb

Flow Adjuster Option:
Yes - Backstop adjuster
Bracket Options:

Available in 90° increments

Vent Tube Option:
No
Normal Open Version Option:
Yes - DC only
Valve Body Material Options:

Polysulfone, Nylon

Diaphragm Material Options:
Silicone
Max Head Pressure:

up to 40" optional

18" water column std.

Max Flow at 4":

3.6 fl oz/sec

Max flow at 12":

5.8 fl oz/sec

Weight:
14 oz
Media:

Water & water-based solutions
Up to 210° F (99° C) Polysulfone body
Up to 170° F (77° C) Nylon body

Agency Approvals
NSF Approval:

No

UL cUL Approved:

File No. MH12958

ENEC:
No