→ 1) Is NSF-18 approval required?
Yes
No
→ 2) Select valve body style <click here for more info>
Valve Body 1, Polysulfone
Valve Body 1, Nylon
Valve Body 3, Polysulfone
Valve Body 3, Nylon
Valve Body 4, Polysulfone
Valve Body 4, Nylon
Valve Body 5, Polysulfone
Valve Body 5, Nylon
Valve Body 6, Polysulfone
Valve Body 6, Nylon
Valve Body 7, Polysulfone
Valve Body 7, Nylon
Valve Body 8, Polysulfone
Valve Body 8, Nylon
→ 3) Select diaphragm material <click here for more info>
Silicone
Viton
EPDM
→ 4) Do you require a vent tube? <click here for more info>
No
Yes - Right of inlet port
Yes - Left of inlet port
→ 5) Do you require a flow adjuster? <click here for more info>
No
Yes
→ 6) Select the required voltage
24 VAC
120 VAC, 60 Hz
220/240 VAC, 50/60 Hz
12 VDC
24 VDC
36 VDC
Other
→ 7) Indicate the application's head pressure
Must be between 1" and 72"
→ 8) Select terminal shape <click here for more info>
Straight
Bent Down
Bent Up
→ 9) Select terminal orientation <click here for more info>
Front over inlet
Back opposite inlet
Left of inlet
Right of inlet
→ 10) Select bracket option <click here for more info>
Option 1
Option 2, front over inlet
Option 2, back opposite inlet
Option 3, front over inlet
Option 3, back opposite inlet
Option 4, front over inlet
Option 5, back opposite inlet
Option 5, front over inlet
Option 5, back opposite inlet
Option 6, left of inlet
Option 6, right of inlet
Option 7, front over inlet
Option 7, back opposite inlet
Option 7, left of inlet
Option 7, right of inlet
Option 9, left of inlet
Option 9, right of inlet
→ 11) Select valve operation <click here for more info>
Normally Closed
Normally Open
